Не всё ещё посмотрел, но с листом гипсокартона гениально, пол-листа в утиль, однозначно лайк

The sheetrock door cutout trick is great...right up until you needed a good scrap piece.

@bonesrhodes3762

2 жыл бұрын

---- many rockers charge by the number of sheets used - no incentive to be frugal

@mikejake6360

2 жыл бұрын

When estimating drywall, we dont take off for doorway top sheets or windows. Estimate like your hanging across tops of doors and scrap the cutout. It's faster to use the router for this which does save the whole piece but when hanging a house there are better pieces to use than the door cutouts

@angelasandridge5372

2 жыл бұрын

Hiiii

@mikejake6360

2 жыл бұрын

@Sig-man Fraud nothing wrong with saving it if you can use it later 👍

@mikejake6360

2 жыл бұрын

@Sig-man Fraud if I did that that I would run out of room fast haha. My crew hangs 3 or 4 houses a week 😉

Спасибо узнал много полезного и интересного в сфере строительства и ремонта! Как раз идёт ремонт и очень пригодиться!

@ZondMan

2 жыл бұрын

+

@user-mi7rj5bu7b

2 жыл бұрын

Та, Эслы шо то сваны... Стэлаэм всо, бутэт как в луших томах парыжэ Бтат!

@aleksanbrklimov2292

2 жыл бұрын

Будет все как в лучших домах Лондона и Парижа?

@kostia_ff_

2 жыл бұрын

чего ты там узнал? Как отбить отмазку с электрода, чтобы сделать арматуру? Или как вырезать гипсокартон в проёме двери не целым куском, который пригодится на этой же стройке, а разломав на части?

@aleksanbrklimov2292

2 жыл бұрын

@@kostia_ff_ тебе какое дело я написал человеку а не тебе!

Great stuff, and some really cool ideas. But tbf, the "hack" with making angles with a square has been a staple of construction, since before the Great Pyramid was built.

It would be great if the videos would be split in two sections. Building inspector ready and Funny, but suspect.

@jesusislord6545

2 жыл бұрын

Repent to Jesus Christ! “Now to him who is able to do immeasurably more than all we ask or imagine, according to his power that is at work within us,” ‭‭Ephesians‬ ‭3:20‬ ‭NIV‬‬ J

The use of string to guide you when walling bricks , we were doing it 60 years ago!

@pourpreprofond8760

2 жыл бұрын

sure you did! but there was no internet at that time...

@arnarne

2 жыл бұрын

I know... Also there was the "hack" of using a ruler to draw a straight line! These videos are rubbish!

@beerman9807

2 жыл бұрын

And some one before you wa doing it 100 years before you was birn

@wcdrobbo4483

2 жыл бұрын

Called a tingle line in U.K.

Just watching things get constructed is informative the fancy title of the video wasn't needed, but thank you for showing us this.

Wow, somebody invented the string line.

@kwissiekwissie

2 жыл бұрын

hahahaaa

You missed one where a worker found a hack to use a plum bob to establish a vertical line by attaching it to a string.

@ben1447

2 жыл бұрын

And a level to check it's level

@angelasandridge5372

2 жыл бұрын

Hiiiiii

@gerardmontgomery280

2 жыл бұрын

Oh my god!!!! Amazing!!!!! Keep it to yourself but I found a way to drive screws 8nto things with a screwdriver. 😆 Seriously though these videos crack me up.

OMG I can't get enough of these videos! Now, if only I could remember any of them when I might need them and what video they were in LOL.

@jesusislord6545

2 жыл бұрын

Repent to Jesus Christ ! “Now to him who is able to do immeasurably more than all we ask or imagine, according to his power that is at work within us,” ‭‭Ephesians‬ ‭3:20‬ ‭NIV‬‬ J

I really like those smart and simple ways to get job done!

Most of these people just doing their job normally that's just how the job gets done

@angelasandridge5372

2 жыл бұрын

Hiiii

@jacobcoates8911

2 жыл бұрын

@@angelasandridge5372 hello ??

2:00 man. He wasted a big piece of dry wall. Smh

AMAZING!

They showed us that a ruler is the best tool to use as a ruler!

You can now hold a string line with a bit of bent wire ???

that drywall 'hack' is just wasteful. He could have cut it as a damn square, and had a good sized piece of plasterboard to use for filling in odd sized gaps in other areas, instead of hacking a full 8x4 sheet up to fill a 2x3.5 space.

@chrismangum2219

2 жыл бұрын

I’m glad I wasn’t the only one who thought that was a waste.

@melanieinsaskatchewan7964

2 жыл бұрын

1 word.....Dremel.

Create a square with iron bars....that last one. Just imagine if you found videos on building an onsite workbench to bring that mans back up to a good working height, and avoid injury from bending for 10 hours. Did they explain the logic of placing the tool at ankle height? I'd really appreciate a followup video on "Why we place tools that can be operated at any height only 12-15cm off the ground."

@helpmetoreach1ksubcribers233

2 жыл бұрын

kzread.info/dash/bejne/gYCMuqx_Z6vReMo.html

Спасибо! А утеплитель лучше резать, положив на него не только бумагу, но и правило, чтобы сжать и резать по прямой линии.

Almost all of these are not "hacks". It's called knowing your trade.

@voxelspec5647

2 жыл бұрын

Facts

@voxelspec5647

2 жыл бұрын

My dads a general contractor and he knows almost all of the construction “hacks”

@hwrdthomas

2 жыл бұрын

Exactly…comes from working instead of sitting on your rear playing games all day.

@angelasandridge5372

2 жыл бұрын

@@voxelspec5647 hi

@angelasandridge5372

2 жыл бұрын

@@voxelspec5647 hi

The drywall repairs can be done without the clips. Just cut out the square on the new drywall one one side, then brezk the edges and tear off the excess drywall around the square leaving flaps, then just put the square into the whole and use plaster to stick it to the surrounding drywall.

@coreyparsons2572

Жыл бұрын

Then the first person to lean on that area would fall through the wall with little to no pressure

That tent post weight was handy when you go camping and bring bags of cement.

@angelasandridge5372

2 жыл бұрын

Hiiiii

@angelasandridge5372

2 жыл бұрын

@Hello im MR Johnny Cash hi

@NocturneOP55N1

2 жыл бұрын

@Donald J Trump And i won bigly And make sure to camp near a sea/ocean so you can also have sand

@ 3:15 use wood paint stirring sticks and 10sec drying glue. Glue 4" of paint stick inside wall, hold each for 10sec, then add more glue to exposed paint sticks then press in drywall patch board....boom

@helpmetoreach1ksubcribers233

2 жыл бұрын

kzread.info/dash/bejne/gYCMuqx_Z6vReMo.html

That Bricklayer don't know his Trade. I am sure he never Learned it Properly. Looks good for the ones that don't know .

@wardsmith2542

2 жыл бұрын

5:00 mark didn’t stagger bricks

Спасибо всем.

@helpmetoreach1ksubcribers233

2 жыл бұрын

kzread.info/dash/bejne/gYCMuqx_Z6vReMo.html

Lmao the string line 💀💀💀 we use a line all the time to keep projects straight

If you blink you'll miss these hacks ...keeping them short, is a sure way to make people watch again and again.. clever!💕

Благодарен_ за труд.

O canal do faça sua obra mostro 3 dicas nesse vídeo, parabéns a esse brasileiro que tem ajudado a muitos e no mundo agora .

@idrcristiano

2 жыл бұрын

Ele é muito didático

@jesusislord6545

2 жыл бұрын

Repent to Jesus Christ! “Now to him who is able to do immeasurably more than all we ask or imagine, according to his power that is at work within us,” ‭‭Ephesians‬ ‭3:20‬ ‭NIV‬‬ B

The tile at the end was mixed too thin the rake was sagging everywhere. They got the "hack" job alright. We can do it right or right now, which one you want?

@CarlosCesar-vm2jq

2 жыл бұрын

U .

@angelasandridge5372

2 жыл бұрын

@@CarlosCesar-vm2jq hiiii

Parabens mestre e gratidão em compartilhar seus experiencias, amem

Bravo! Real skill cannot be drunk or eaten - it will always feed!

@danceswithtallcans7694

2 жыл бұрын

Try again, that didn’t make sense …. Slappy ✋🏻

@helpmetoreach1ksubcribers233

2 жыл бұрын

kzread.info/dash/bejne/gYCMuqx_Z6vReMo.html

@Brutell01

2 жыл бұрын

@@danceswithtallcans7694 it's google translate from Russian proverb. 😆

@Brutell01

2 жыл бұрын

You can't waste your talent(skill) on alcohol.(unlike money)

@WycliffStudios

2 жыл бұрын

Wtf

Gostei muito de todos os truques...vou usas muitos deles... pois eu faço de tudo um pouco...gosto de estar sempre aprendendo algo diferente parabéns...🌷

Muito bom 😃😃😃 parabéns trabalho inteligente

@rachidg9522

2 жыл бұрын

Daar hekje helemaal gelijk in

@crnsilva1016

2 жыл бұрын

Da uma olha no meu serviço, agradeço.

@crnsilva1016

2 жыл бұрын

@Phoenix 𝙾𝚙𝚎𝚗 𝙼𝚢 PROFILE Reforma do banheiro mudança radical kzread.info/dash/bejne/mKB2p9Ocmqaxnag.html Reforma do quarto infantil kzread.info/dash/bejne/qH-ej8eAerPMc7A.html Reforma do quarto e acabei com infiltração vinda do solo kzread.info/dash/bejne/aJd3ydixg9nXetI.html

Muy bonito gracias x comparitr sus ideas..brillante.

C simplement le génie humain...!!! pas des intellectuels tranhumanistes a la Alexandre ...mais des ouvriers Talentueux..merci !!!!!!!

fantastic tricks of the trade, ideas and more. I love these vids.

Some of those were very helpful and useful the one with the sheetrock with the little Clips to fill in the Square I will be using that that was awesome

I laughed out loud at the fact that masons line is a “hack”

@sheepboi29

2 жыл бұрын

I laughed at the poor grammar

@kwissiekwissie

2 жыл бұрын

#ClickBait

@surveysays8335

2 жыл бұрын

Literally the way 98% of all masons do it this way... Jesus... I'm gonna make some videos... I've got this incredible way I keep my shoe laces from getting under my other foot... I... LOOP them, then Tie the up... and I can't step on them.. It's amazing.

@sheepboi29

2 жыл бұрын

Lol

@shootadeah

2 жыл бұрын

Everything from this channel is labeled a hack or amazing workers aka people working 😂

I see a brick layer digging into my rod oven wasting rod like that and its not gonna go well

6:10 "what's Gibby thinkin about" thought I was losing my mind

I always come here for the entertaining comments, rather than the videos. Maybe that's thier strategy... create content that fuels the WTF in so many people. Almost 4m views. They're doing something right!

If that using magnet to fish line down a wall works that'd be one of the most useful tricks I have ever seen

@leverloos

2 жыл бұрын

It doesnt though. Because any drywall would have insulation packed in it.

@chrismangum2219

2 жыл бұрын

@@leverloos Interior walls don’t always have insulation, and if the magnet is strong enough the slug would slip between the wall and insulation.

The whole time I was watching I was thinking to myself that these are tradesman techniques that are probably used every day but since I’m not in the trades its new to me but not a hack just common sense engineering by regular joes trying to get the job done. Necessity is the mother of invention.

Поставьте профиль горизонтально в каркасе гибсокартона, как и положено! И тогда мне интересно будет как магнит протащит протяжку 🤷

For the insulation pro, you use a board on top, to compress the insulation making it much flatter and easier to cut. Still keep a piece of wood underneath to protect the floor, although you shouldn't be doing that on a finished floor 🤦🏼‍♂️🤷🏼‍♂️✌🏻

All the people that never tried any of this stuff be like "omg this is amazing"

Has this bricklayer just invented the string line haha

Most amazing tips 😍

@helpmetoreach1ksubcribers233

2 жыл бұрын

kzread.info/dash/bejne/gYCMuqx_Z6vReMo.html

6:11 is a great hack because everyone has their own gunite rig

@drshockter2158

2 жыл бұрын

Lol

0:30 smashing welding rods to use for line blocks seems kind of expensive especially when the box of rods can be upwards of $500 and you can get line blocks at home depot for $2 each 🤔🤔🤔 haha ...

First hack: they’re called brick lines, usually wooden block cut wit a groove (for the string) and a protrusion (to pressure-latch the outside of the brick). They are literally as common as trowels and brick hammers. That being said the hand made metal ones look kinda cool.

@angelasandridge5372

2 жыл бұрын

Hiiiiiii

1:45 is slower and wastes drywall. Handsaw run up the studs and a back cut with a knife across the top and off it comes in one piece.

Excelent you have paper walls in your Land . Nice Acustic and nice Heatisolation.. Work 5 Seconds to make an hole . Wow excelent

Thank you for sharing. Your channel is an inspiration to our channel and several others. Keep it up!!

@helpmetoreach1ksubcribers233

2 жыл бұрын

kzread.info/dash/bejne/gYCMuqx_Z6vReMo.html

Những thủ thuật và mẹo quá hay! cảm ơn addd!

@h.a.l.grouprealestateconst6955

2 жыл бұрын

kzread.info/dash/bejne/oJN6mNRqe9q9kag.html

Отлично всё придумано! 👍

Я конечно не строитель, но было дело работал в отделе, больше половины тут показанных ненужных советов.

Holy hell you can use a string for walls... I should tell my dad and grandfather about this. All those 60 years of them putting in footings and setting up foundations.

at 2:18 I wouldnt broke that in 3 parts, it was usefull whole

Cutting out a doorway like that is a great way to waste material and notching a bend stud is a good way to fail a building inspection

@alankluttz4400

2 жыл бұрын

I doubt 99.9% inspectors would ever catch that. If he glued it, it'd be great

@Dedubya-

2 жыл бұрын

Most of these video clips would appear to come from countries where I doubt they have building inspectors!

@natethegr8230

2 жыл бұрын

A backing crew goes into a framed house and fixes all the little problems, like warped or bowed studs. That's literally their whole job.

@alankluttz4400

2 жыл бұрын

@@Dedubya- point

7:09 That ever reassuring thumbs-up! Yeah! It'll pass the earthquake test, trust me!

@FuckTheState

2 жыл бұрын

Why would it have to pass an earthquake test? He was demonstrating a way to put the temporary boards up in order to make concreate columns in me middle of brick walls. Oh and btw, the guy is from Brazil and we have no earthquakes here lol

@audacyspectrum3612

2 жыл бұрын

@@FuckTheState It's called "sarcasm". And you do have earthquakes in Brasil! I have a friend in San Diego Chile, one of the worst hit places in the world for high magnitude quakes! Not to mention Equador, and many more!

На маяки для кладки кирпича обязательно электроды угандонить ?

@user-mi7rj5bu7b

2 жыл бұрын

Аны савсэм тэбылы там чтолы???

Goddam KZread is brutal with the ads turning into regular cable

Good stuff… thanks!

When I scroll to watch your videos I noticed that the content shown is not in the video, could you please include what’s in the picture please. Love your ideas they have been very helpful. 🙂

You dont need to buy special clips to repair drywall. A small piece of batten fed through the hole and screwed from the front does exactly the same thing...

That string line hack was genius!

@melanieinsaskatchewan7964

2 жыл бұрын

NO, it wasn't. First year first day masonry school.

@thedalillama

2 жыл бұрын

@@melanieinsaskatchewan7964 I hear sarcasm was banned in Canada along with freedom.

@melanieinsaskatchewan7964

2 жыл бұрын

@@thedalillama I'm dreadfully sorry that TRUTH hurts your feelings. Call ANY mason ( that's a brick layer for you less than cognitive mouth pieces) and they will say the exact same thing. In fact my MENSA friend if you can't figure out a string line, a real mason will likely beat you senseless with yelling and his trowel. Now how's about you disappear back to the space under the deep frier and do what you're good at.

The plasterboard cut for the door 🤦I can here my old boss saying to cut straight and use the off cuts🙏🏻😉

Also, when using 'fibreglass' as an insulator, use gloves and a mask when handling it. Theres small fragments of glass that make your skin itch for weeks and when inhaled.... Well i think it speak for itself

@donniebrown2896

2 жыл бұрын

The trick. Bath in cold water shower, wash clothing with vinegar.

I finally reached the point where hack videos rarely impress me, they leave me wondering why people attempting the work don't know the solution and need YT hacks.

@michaelwerkov3438

2 жыл бұрын

i mean, most of the people turning to youtube are either looking for other ways to do one specific thing, or are trying to learn how to do things on their own, in which case it is kind of stupid to say "you cant look up what you dont know because you dont know." everyone has to start somewhere, and a 40-something-year-old who wants to learn some things themselves instead of paying 20k for people to build shit for him and not learn anything, they dont get to go back to being 18 and working for a family friend to learn, and i dont see many 40 year old who are trying to avoid paying 20k in labor costs paying to go to trade school for a year or two just to work on their own house. like... i get it, this shit isnt impressive for people who actually do it for money or have been doing it as a part time trade for years. but it doesnt make your dick any bigger to tell the world how much more you know about a trade than someone who doesnt work in the trade... matter of fact, it makes it look quite a bit smaller and self-conscious

A bricklayer working to a line... WOW MIND BLOWN -.- who needs to learn a trade when we have yt shorts.

1:35 A lot of comments say not to do drywall this way. For us non-pros, why not? (It looks ok)

Shotcrete worker was enjoying his work😃

Winnidesigns with the big tile trick is my new hero. Will use part of a still-to-be-won-jackpot to let him redo my bathroom as a reward.

lol scoring the sheetrock that many times on both sides you could have just did it right the first time and only cut 3 areas and been done. That was so cheesy...lol

@dogcreek-customs5168

2 жыл бұрын

Cutting fiberglass insulation with a razer knife ok that's fine but using large sissors works so much faster and more effectively.

Если мастер так мне резал пройомы в дверях что половина в отход :то я с ним отходами и розплатился бы

I didn't know you could do a controlled curve break on a tile

Есть интересные вещи, но кладка кирпича это прикол) За такую пустошёвку голову отшибать надо)

the bag for drilling is indeed impressive

Amazing creative👍

@helpmetoreach1ksubcribers233

2 жыл бұрын

kzread.info/dash/bejne/gYCMuqx_Z6vReMo.html

Улыбнул узбекский гипсокартон😁

This is the coolest channel! I love all these ideas and shared your channel with my husband and our son! 👍🏽

If one of my employees took that much time to cut out a doorway , it would be their last day on my site…

I love these videos

@helpmetoreach1ksubcribers233

2 жыл бұрын

kzread.info/dash/bejne/gYCMuqx_Z6vReMo.html

Excelente

Кусок гипсокартона можно было ещё использовать,а не на свалку,в коронку вкладываю поролон смоченный в воде. В целом годные советы.

@christopherstaats3787

2 жыл бұрын

😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃""

Nice work bro 👍 I m civil service provider thank

@crnsilva1016

2 жыл бұрын

Reforma do banheiro mudança radical kzread.info/dash/bejne/mKB2p9Ocmqaxnag.html Reforma do quarto infantil kzread.info/dash/bejne/qH-ej8eAerPMc7A.html Reforma do quarto e acabei com infiltração vinda do solo kzread.info/dash/bejne/aJd3ydixg9nXetI.html

Superb video! Thanks!

Как называется колба с жидкостью в самом видео куда он болт завертел? Крутая штука. А я парюсь дырки цементирую перед тем как дюбель в стену вставить а тут вообще без дюбеля можно. У меня на стене дома спутниковая антенна расшаталась. Причина в дюбеле. Кирпич раскрошился или цемент и не держится

As for fiberglass foam, just get one of those knives specifically designed for cutting it. Its worth the 20 €.

@helpmetoreach1ksubcribers233

2 жыл бұрын

kzread.info/dash/bejne/gYCMuqx_Z6vReMo.html

@Traitorman.14.3

2 жыл бұрын

I just use a strip of thin metal. Give it a sharp edge with an angle grinder.

#1 is called mason level blocks, been around for thousands of years.

These aren't hacks these are just guys doing their job

YES, GOOD IDEAS.......VERY EASY, VERY FAST....👏🏻👏🏻👏🏻👏🏻

I like that drywall hole repair. I have not seen that at your local Home Depot though.

@chrismangum2219

2 жыл бұрын

Lowe’s, I just bought some.

Настолько гениально,что НЕ понял где))))

Nothing is possible for the intelligence of the man if you want to work or created anything you do it don't back off God give the powerful intelligent to the man to help and teach others God Bless the lord and god bless the man intelligence.

Well I luv, luv these videos EXCEPT, would like a slower version so I can read what I am looking at first, since I am a woman learning these things working on my tiny house

TEŞEKKÜRLER 👍

اللهم صل وسلم وبارك على نبينا محمد وعلى آله وصحبه أجمعين 💝