Yeah sure you could cut a perfectly good and brand new 6" $15 - $25 taping knife to fit the contour of the bucket, which of course means that you must then buy a new 6" $15 - $25 taping blade/knife for the actual application. OR... for $7 you could simply buy the scoop they make for that very purpose which is already contoured to fit the curve of the bucket.

@plantasmentes8986

2 жыл бұрын

Or else they could make use of a square bucket... hehehehe

@kelly-annflanagan7693

2 жыл бұрын

@@plantasmentes8986 🤣😂🤣😂 they actually have those. Though technically it's a HD square cardboard box with a HD sheet plastic liner. The drawback being that you have to add your own water in the job site. The pro being it's lighter, less expensive and much more environmentally friendly.

@patrickmcguire1303

2 жыл бұрын

really all he had to do is rotate the knife 90 degrees and run it that way. never had a problem scraping my buckets clean with a standard 6 inch knife.

@kelly-annflanagan7693

2 жыл бұрын

@@patrickmcguire1303 I agree I personally just don't care for that method, myself.

@patrickmcguire1303

2 жыл бұрын

@@kelly-annflanagan7693 agreed lol either way we said is better than cutting a new knife and like you said theyre only ~$7 for the curved knife.

Hack for installing nails without a drill; hit the flat part opposite the pointed end with a hammer!

5:12 Don't do that! Just take the face plate off and put the walpaper over the outlet. You can make a hole later and put the face plate back on. Much neater.

@andrewe1073

2 жыл бұрын

Just like smashing a copper wire to wrap around strand wire instead of a quick drip of solder

@KeymoreNick

2 жыл бұрын

Better to remove this socket for coaxial cable. Nobody uses coaxial cabels in 2021.

@wil-fri

2 жыл бұрын

@@KeymoreNick now all runs over IP

@gamuraproductions4577

2 жыл бұрын

kzread.infomKq8GYXQvQE?feature=share

@Black_user.98

2 жыл бұрын

😉😊

8:55 Why destroy a good drywall knife? You can buy a drywall bucket scoop made for the job with a bend in it to make scooping easier and less messy: $6

@cheeseheadfiddle

2 жыл бұрын

I’ve never seen one. But I just scoop from the center, and turn the knife sideways to clear the sides of the bucket. But it’s a cool idea.

Видео просто супер! Даже для бабушки вроде меня! Спасибо большое. Всего хорошего и здоровья!

So glad to see bottles reuse d this way. I have been saying to do this for forty + years.

Benjamin Franklin Out of his own mouth he said hes the laziest man in the world. All of his inventions would make life easier. Some people have an engineering mind Whether if they have the money to buy the tools they need either or they think of an easier way to do it themselves. This is a sign of pure genius.

@roblena7977

2 жыл бұрын

Dude was legendary on so many levels

@mylord4321

2 жыл бұрын

@Rob Lena HIM and a guy named tesla Brilliant people. Tesla the smallest of them all. The guy held patience on just about everything. Thomas Edison was a fraud. The bankers like Edison Edison would have never had AC power he said it was impossible to do that's not what Tesla said. Thank Tesla for your electricity not Edison Edison played with batteries. DC power Edison didn't believe in alternate current. That's why Tesla had a dream I thought he could do it alternate current with magnetic Power. Edison thought he was insane. Tesla made the biggest discovery of the world. And got very little credit for it. You could thank JP Morgan for that the biggest criminal banking system that ever was devised.

@roblena7977

2 жыл бұрын

That dude I think was the inspiration for every Hollywood mad scientist. We got lucky with him because he had the potential to be the world's first super villain. Dude was probably sitting on a billion dollar idea and wouldn't sell it to save a few lives.

Super smart brain, and super hands-on ability. I admire too much

Специальный мастерок, который нужен только, чтобы шпаклёвку из банки набирать. Как я давно о нём мечтал.

@paulv8184

2 жыл бұрын

Вот вот, я и думаю как им потом шпатлевать, видимо нужна стена с определённым закруглением, такого же радиуса как и в банке)

@user-py1sk4me3n

2 жыл бұрын

А повернуть его боком и провести собрав остатки со стенки, религия не позволяет?!

Действительно, можно бесконечно смотреть как течет вода, горит огонь и работают люди (неважно мастера или подмастерья)

@Kafulso

2 жыл бұрын

Yes.

Приятно смотреть, когда руки у человека растут правильно и дружат с головой.

@1999manarok

2 жыл бұрын

сказать что они все дружат с головой нельзя. 1 претензия к ребятам с сеялкой, сколько по вашему мнению проживёт дрель в такой сеялке? 2 претензия к парню с пусорным мешком и цементом , каким гераклом нужно быть чтобы это руками мешать?

Дрель для привода сита может час и проработает при такой нагрузке потом хана подшипникам .

Brilhante idéias muito obrigado.🇧🇷🇧🇷🇧🇷👍👍👍 parabéns . vídeo bom.

@gamuraproductions4577

2 жыл бұрын

kzread.infomKq8GYXQvQE?feature=share

As a professional contractor the first five of these "where I stopped watching" all have their own special tools that do the exact same thing but better.

@feidhlimidhmacanaltha3644

2 жыл бұрын

Maybe its amied at the amateur diyer who only needs to do the job once and to save them the cost and the bother of buying specialist tools.

@Vaynthegreat

2 жыл бұрын

@@feidhlimidhmacanaltha3644 tile hole saw 5-10$ at home Depot to do that job right... So I doubt that but I guess.

@feidhlimidhmacanaltha3644

2 жыл бұрын

@@Vaynthegreat and which job shown in the video are you referring to please?

@Vaynthegreat

2 жыл бұрын

@@feidhlimidhmacanaltha3644 I'm not going to watch the video again just to list all the tools the person should be using and how much they cost. You can educate yourself on proper tools for the job. I do remember the person using a drill to drill a hole and they make wet hole saw tools for that like tile and concrete hole saws.

@feidhlimidhmacanaltha3644

2 жыл бұрын

@@Vaynthegreat thanks, you just confirmed my suspicion that you dont have a clue what the fuck youre talking about.

Настоящий Мужчина! Супер! Спасибо большое! Этот Мужчина достоин уважения!

@serbakreatif

2 жыл бұрын

Please like 👇👇

совет только один... не стройте ничего из г-на и палок... а то путнская раисся получится... 😊

Só idéias geniais.

Самый полезный канал из всех что я видел! Большое спасибо за ценную информацию!

@gamuraproductions4577

2 жыл бұрын

kzread.infomKq8GYXQvQE?feature=share

@user-jn4tx5ii4r

2 жыл бұрын

Ты что, правда увидел что-то полезное.Там кроме как делать насечку для резки плитки в труднодоступных местах, ничего полезного.Все остальные улучшалки и экономки времени приведут к повторному ремонту.А прикол с краном, так вообще к большим финансовым тратам в пользу ремонта соседям))

@user-vv4lf3ie8r

2 жыл бұрын

@@user-jn4tx5ii4r мы по разному смотрим на это, я вижу не только то что мне показывают, я вижу идею, которую могу проанализировать и сделать свои выводы

@8:38 amateurs mistake. The rebar is exposed because the concrete has carbonated and the steel is loosing it's passivity. The rebar is just going to corrode remote from the paint and there's nothing you can do about it unless you can remove carbon dioxide form the atmosphere. If you've got that problem your entire concrete structure is gone and past its life.

With the bottled wall i had the intrusive thoughts about preparation of materials ;p

Nossa tem coisas que nunca vi e sao otimas

Uma ideia puxa a outra, maravilhoso! Deus deu ao homem infinita inteligência!

Lots of good ideas. Really like the one cutting the curve on the putty knife and the template made for the sheetrock for around the bathtub faucet.

@captnmaim

Жыл бұрын

Yes, cut the curve in the putty knife to get the most out of the bucket and then realize your putty knife is useless for application

Tips dan trik || yang sangat berguna untuk pekerjaan, thanks

Мастерок от шпатлевки потом еще раз обрезать до ровного состояния.

@TheDingir

2 жыл бұрын

Это вообще верх идиотизма.

@KlaroBordo

2 жыл бұрын

Можно было и прямым с ведра взять, по горизонтали 😅

@dmitriishatalov2210

2 жыл бұрын

чисто накладывать на др. шпатель

@user-hq2cq1qc4n

2 жыл бұрын

Я бы посмотрел как им со дна остатки брать. 🤔😈

Нельзя завязывать провода в вилке. Что бы зажать тонкий провод надо просто перевернуть зажим провода. Он для этого предназначен. В крайнем случае всегда можно намотать изоленту.

@iteerrex8166

2 жыл бұрын

Yes, the heat well short-out the wires.

@user-uz6ec6sd2m

2 жыл бұрын

От плавки изоляции сразу к/з

@paulv8184

2 жыл бұрын

Про завязывать согласен, нельзя, а про "перевернуть зажим провода" не понял. Можно чуть подробнее?

@KeymoreNick

2 жыл бұрын

@@paulv8184 2:50 Посмотрите внимательно. Зажим для кабеля имеет два ребра, которые, в данном случае, должны смотреть в кабель, а не к нам. Но, я бы на два провода намотал бы изоленту для начала.

@paulv8184

2 жыл бұрын

@@KeymoreNick большое спасибо, не знал

I love it when people discover calculus unknowingly.

Some extremely clever and brilliant minds in the human species that's for sure

Great work! 👍👌

Для закрепления многожильного провода есть специальные наконечники под обжим. Я бы посмотрел на автора как он так будет обкручивать пару тысяч наконечников... А чтобы провода не ломались, нужно их не перетягивать и не кататься на них как на лианах

参考になりました。 It was helpful.

@gamuraproductions4577

2 жыл бұрын

kzread.infomKq8GYXQvQE?feature=share

Very useful ideas.

Есть интересные задумки, но для многих этих поделок уже есть готовые инструменты или приспособы. Здесь более уместно название - как выкрутиться в ситуации, когда нет нужного прибора. А магнит вставлять под перчатку не очень удобно - надавит и поцарапает руку. Есть же магнитные браслеты на запястье.

@gamuraproductions4577

2 жыл бұрын

kzread.infomKq8GYXQvQE?feature=share

So much Great tips! Thank you! 👊❤️

@gamuraproductions4577

2 жыл бұрын

kzread.infomKq8GYXQvQE?feature=share

@serbakreatif

2 жыл бұрын

Yuk intip kesini 👇👇

우와! 동영상이 끝날때까지 눈을 뗄수가 없네요.👍👍👍

Those were some great tips. 🤔 Please keep posting. 🤓

That wallpaper trick is amazing. I wish I knew that before putting in wallpaper, I really don't like the straight joints. Now you just need a quick way to apply glue to the paper.

@John-ob7dh

2 жыл бұрын

I have used the wallpaper ready glued.Its great.

@uwea.6329

2 жыл бұрын

Non-woven Wallpaper

@surf2257

2 жыл бұрын

But i think the waving was just to demonstrate that you dont have to worry cutting in a straight line, as long as you stay in the double layer you've created before cutting. I've used that trick all my life with almost any material...

@spetsnaz1014

2 жыл бұрын

The wallpaper trick is nothing new. The reason you cut a 'wavy' line is a visual trick. The eye is more likely to spot a straight cut, a wavy cut is harder to spot.

Fantastic, Many tks ,appritiate lot for sharing, helping the field guys to think safty and efficiency. Many thanks. (an Interior Architect)

We can use the trick everyday because this cannel. Thank you for sharing

These are such great tips. Love the wallpaper one about cutting waves!

@gamuraproductions4577

2 жыл бұрын

kzread.infomKq8GYXQvQE?feature=share

For the second clip where you tighten the wire down. They make sleeves for that.

@dennismoroz1289

2 жыл бұрын

true but in a situation where u dont have them sleeves that could be a temporary thing

@skulakk1360

2 жыл бұрын

Well you clearly didn’t read the title of the video

@noorulhassan4757

2 жыл бұрын

@@dennismoroz1289 111122feet 0

My goal in life is to be a construction worker!

이런게 생활의 진짜 예술이죠

Все очень классно и познавательно, поддерживаю с меня лайк

@igordjanOficial

2 жыл бұрын

Согласен! Правда электрики там дерьмо! Так не повторяйте!

@irfanrazaraza4608

2 жыл бұрын

L

@prasantabhattacharya2846

2 жыл бұрын

@@igordjanOficial is that

Приятно видеть как работают руками, растущими из плеч

Thank you, this video is awesome and useful...have a productive day!!! Take Care!!

Terimakasih atas informasinya... berbagi pengalaman.... salam satu hobi dari Lereng Gunung Slamet saudaraku

A melhor seleção de dicas que já vi! 👏👏👏👏 Excelente!

@harryharry3907

2 жыл бұрын

Dbxf

Where can I find people this good at work cuz the ones at my place are definately not half as good as them Don't mean to hurt anyone but facts

@maciejlewandowski7311

2 жыл бұрын

Show them this video. You'll make something good for yourself and for them ;)

@uwea.6329

2 жыл бұрын

Where are you from?

@khushidey2246

2 жыл бұрын

@@uwea.6329 India 🇮🇳

Very informative Thanks sharing

This was extremely helpful and very clever

@serbakreatif

2 жыл бұрын

Yuk please like 🙏🙏👇

Great work, very useful to watch. I found a couple of nice things at 1:56. Well done. I usually find these types of video a waste of time, not in this case. Many thanks...

@belengm789

2 жыл бұрын

Pedazo de aujereada

@serbakreatif

2 жыл бұрын

Please like 👇👇👇

Благодарю Много дельных советов Совет номер 2- опасен. Соглашусь 🔥

Kita 1profesi,, Trik Anda Mantap Kawan... 👍👍👍👍

Спасибо, столько всего дельного!!!👍

@serbakreatif

2 жыл бұрын

Mampir 👇👇👇 please like

I´m not a construction worker, but I love this clip and I´m amazed about the creativity it displays ! Great Job ! (Dirk from Germany)

AMAZING tricks...SEND to all handymen I know....THANK YOU. 🙏❤🤗

@gamuraproductions4577

2 жыл бұрын

kzread.infomKq8GYXQvQE?feature=share

Obrigada obrigada obrigada Foram muito úteis. Incrível !!!!!

@user-wi3ri6lw4r

2 жыл бұрын

مرحبا

@Black_user.98

2 жыл бұрын

😇😉

0:10 this is not correct, there is a appropriate end cap for wires and is way cheaper than flattening a rigid cable

Creatividad para hacer las cosas. Y para trabajar 🧠🧠👀

@gracielalozano1730

2 жыл бұрын

El vídeo es muy rápido te da nociones pero abría que hacerlo y desengañarnos que tan prácticos son las sugerencias. Feliz año. Saludos y bendiciones desde Texas

Hello Quantum Tech , Your vids including Wonderfull ideas and i watch all of them excitedly , keep going man !

Son muy chingones en su trabajo!

Щас насмотрюсь лайфхаков,и пойду делать ремонт,дошел и забыл сделал все по своему

@SenTirTv07

2 жыл бұрын

Ternyata diluar sana banyak ilmu yang harus kita pelajari.... salam kenal dari Lereng Gunung Slamet saudaraku

@OLEGfermer

2 жыл бұрын

😉😂😂😂

@user-mk9np4zm5z

2 жыл бұрын

Главное Сделал

0:40 вообще нужно по уму коробку подрезать реноватором и под неё засовывать плитку

Faydalı bilgiler için teşekkür ederiz.

Excelente 👍 ma encantó el de los palillos 👋

Круто и очень полезно

@gregoryschermbeck9883

2 жыл бұрын

They make it look so easy..

Интересное видео,полезные советы!!🖐👍👍

@gamuraproductions4577

2 жыл бұрын

kzread.infomKq8GYXQvQE?feature=share

Realmente increíble, todo está en la imaginación y la disposición, bonitos trabajos.

@SenTirTv07

2 жыл бұрын

Dan tentunya kita juga bisa melakukannya... salam kenal dari Lereng Gunung Slamet kawan

@user-dw7xw8bx6z

2 жыл бұрын

m.kzread.info/dash/bejne/c6ONk8SMe9fNmso.html

Это супер видос, надо по каждому моменту себе памятку сделать

Amo estos videos.

Excelente, gracias 🙏🏻 por sus habilidades y conocimientos. Bendiciones

@TestDonCqmDJorr-qKDdKENPg

2 жыл бұрын

EIE&$9Si0'Y

@Black_user.98

2 жыл бұрын

😊😉🙃

É impressionante como é fácil identificar vídeos Brasileiros 🤣😂🤣😂🤣😂

Гениально ТО что просто!!!

Glass bottles for insulation. Do they need to be filled to provide the maximum insulation. And if so then what should I fill them with?

Great tips. Amazing what human hands can do when connected to a thinking brain!!👍

@ekroizm

2 жыл бұрын

Yeah, nice hazard there.

@vikingving7666

2 жыл бұрын

See how he does, tries very hard: kzread.info/dash/bejne/fJxm18-Ao6i_eMY.html

As a plumber myself... I can say that I am truly offended but the Dowl/ziptie pipe clip... However, if I'm desperate I will definitely use that 🤣

Exelente compadres, como que te habré la mente e imaginación gracias maistros gracias

One of the best idea filled videos yet!

Love these vids. That trick with reversing the clamp, I’m going to use for sure!!

@8FaKRaS8

2 жыл бұрын

Yeah, i thought "i'm so dumb for not thinking about that" lol xD

@spetsnaz1014

2 жыл бұрын

It's an actual design part of the clamp, I've used it for decades, it's nothing new.

Fantastic tips 🌟👌 Well done guys 👏👏👏

Как всегда на высоте

This is like the only "hacks" channel that actually gives good tips...

Bem que os fabricantes de bebida podiam adotar frascos com em forma de tijolos aí seria bem fácil a reutilização. Patente é minha kk

Really useful and very smart ideas and tricks, well done, do not skimp on us with more of these beautiful and useful videos, good luck

Woow amazing... kreativitas and education full thank watching videos... i'm From INDONESIA

اللهم صل وسلم وبارك على نبينا محمد وعلى آله وصحبه أجمعين

Amei ❤️😍

@gamuraproductions4577

2 жыл бұрын

kzread.infomKq8GYXQvQE?feature=share

@Black_user.98

2 жыл бұрын

😉😊

@Black_user.98

2 жыл бұрын

@Tech World 🥰😍

Много полезного конечно,но слава богу я на стройке больше не работаю

@SenTirTv07

2 жыл бұрын

Menjadi sebuah kenangan tersendiri kita pernah melakukan pekerjaan itu...salam kenal dari Lereng Gunung Slamet saudaraku

@samuelschar45

2 жыл бұрын

AA

@user-st3hn5fe1s

2 жыл бұрын

P

@user-st3hn5fe1s

2 жыл бұрын

P

@user-st3hn5fe1s

2 жыл бұрын

@@SenTirTv07 p

Большое спасибо за вашу работу

Impressed by the wonderful work ♪

8:43 “glass…provides perfect insulation…” Uh, I don’t think so. Glass is a horrible insulator!

@StevePringle

2 жыл бұрын

I came to see how they used it and it was just a photo. 🤦

@bobhiatt84062

2 жыл бұрын

@@StevePringle right?! No “click bait” going on here! Haha 😛. Sorry you got your time wasted.

Вот полночь близится, а я здесь зависла.... Не пойму, зачем, ещё и до конца досмотрела, коменты все почитала... Ладно, поставлю лайк, человек трудился, возможно и мне что-нибудь пригодится, в следующей жизни. 😁😁😁❤️❤️❤️

@user-yq5mu2ej4v

2 жыл бұрын

увлекательно , согласен ...

ماشاء الله تبارك الرحمن شغل مرتب وأفكر جميله

@gamuraproductions4577

2 жыл бұрын

kzread.infomKq8GYXQvQE?feature=share

very useful tips and tricks, great ideas easy to do,...worth a try...👍👍😉..MANTAP

@serbakreatif

2 жыл бұрын

Please like 👇👇👇

Hey, if you live in a country with very few laws about quality or safety in construction, these are great. Also, it's not a hack of the product you're using already exists.

Tip 2 is outright dangerous. Stranded wire should always be secured with a proper fitting ferule when used in a screw clamp. Any slop can create sparking and a bad fit on the ferule allows the strands to slowly move due to the pressure of the clamp, again creating slop and therefore increasing the chance of sparking and a connection with to high of a resistance. If the resistance of this connection becomes high enough you even risk your breakers not popping when a short occurs

@becks23mt

2 жыл бұрын

@Miles Doyle fuck is wrong with you? 🤦🏿‍♂️

@chuckbailey6835

2 жыл бұрын

@@becks23mt ahaha that's what I was thinking

@Tamerlan_3_131

2 жыл бұрын

@Miles Doyle Что с тобой? Креза или депрессия??? Отдохни

@martinburrows6844

2 жыл бұрын

I think miles point is that theres a faulty connection between god and us. The spark caused the burning bush, and connectivity resistance is bad.

I follow you from Saudi Arabia keep it up💗

There's so much stuff we have at home we can make something great out of it instead of throwing them away.

Dicas e truques incríveis aqui 🔥🔥

@Black_user.98

2 жыл бұрын

😉🙃